|
DOI: https://doi.org/10.15407/techned2020.03.046
CONTROL OF OVERHEAD CRANE MANIPULATOR HOIST MECHANISM FOR LOWERING BASKET TO THE BATH WITH AGGRESSIVE SOLUTION
| Journal |
Tekhnichna elektrodynamika |
| Publisher |
Institute of Electrodynamics National Academy of Science of Ukraine |
| ISSN |
1607-7970 (print), 2218-1903 (online) |
| Issue |
No 3, 2020 (May/June) |
| Pages |
46 - 51 |
Authors
O.I. Tolochko1, V.P. Stiazhkin2, A. M. Ryzhkov2***
1- National Technical University of Ukraine Igor Sikorsky Kyiv Polytechnic Institute,
Peremohy ave., 37, Kyiv, 03056, Ukraine,
e-mail:
Этот e-mail адрес защищен от спам-ботов, для его просмотра у Вас должен быть включен Javascript
2- Institute of Electrodynamics of the National Academy of Sciences of Ukraine,
56 Peremohy Ave., Kyiv, 03057, Ukraine,
e-mail:
Этот e-mail адрес защищен от спам-ботов, для его просмотра у Вас должен быть включен Javascript
* ORCID ID : https://orcid.org/0000-0002-6871-0653
** ORCID ID : https://orcid.org/0000-0003-0602-1112
*** ORCID ID : https://orcid.org/0000-0002-0011-9402
Abstract
The paper analyses mathematical model for hoisting mechanism of overhead crane manipulator. This crane is expected to operate in waste processing plant in process of deactivation metal. The hoisting mechanism has the form of telescopic column. This column used to submerging basket full of polluted scrap metal in bath with deactivation substance. The model takes into account changes of static torque resistance and motor inertia. The torque resistance change is produced by buoyancy force when basket with load submerging and motor inertia when basket detached from column after sinking to the bath bottom. Results of Simulink modelling showed point to use position control systems. References 7, Figures 7.
Key words: crane manipulator, hoisting mechanism, buoyancy force, position control systems.
Received: 04.09.2019
Accepted: 25.02.2020
Published: 05.05.2020
References
1. Stiazhkin V.P., Podeiko P.P., Zaichenko O.A., Havryliuk S.Y., Ryzhkov A.M. Automated control system for electric drives of a overhead crane for installation of metal decontamination. Elektrotekhnycheskye i kompiuternye systemy. 2015. No 19 (95). Pp. 71-74. (Rus) DOI: https://doi.org/10.15276/eltecs.19.95.2015.18
2. Ryzhkov O.M., Kondratenko I.P., Tolochko O.I., Stiazhkin V.P. Ways to build an automatic crane manipulator control system. XXIV mizhnarodna konferentsiia z avtomatychnoho upravlinnia Avtomatyka-2017, Kyiv, Ukraine, September 13-15, 2017. Pp. 104-105. (Ukr)
3. Universal Variable Speed AC Drive for induction and servo motors. Control Techniques. 2012. URL: https://www.galco.com/techdoc/cont/sp2202_um.pdf (Access date 02.08.2019).
4. Komponenty system avtomatyzacyy SV ALJTERA. Svaltera. 2016. URL: http://www.svaltera.ua/upload/iblock/9e7/price_6_sensors_.pdf (Access date 02.08.2019). (Rus)
5. Jinbo Wu, Zeyu Yang, Donglai Wu. Impedance control of secondary regulated hydraulic crane in the water entry phase. Ocean Engineering. 2018. No 169. Pp. 134-143. DOI: https://doi.org/10.1016/j.oceaneng.2018.09.025
6. Johansen T.A., Fossen T.I., Sagatun S.I., Nielsen F.G. Wave synchronizing crane control during water entry in offshore moonpool operations-experimental results. IEEE Journal of Oceanic Engineering. 2003. Vol. 28(4). Pp 720-728. DOI: https://doi.org/10.1109/JOE.2003.819155
7. S.-K. Sul. Control of electric machine drive systems. New Jersey: John Wiley & Sons, 2011. 424p.
PDF
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
|
